Connect Pc To Web - Nokia E63 User Manual

Data bearer — Select
•
WLAN network name
•
identifier (SSID), that is, the name that identifies the
specific WLAN, select
network from the WLANs in range, select
networks.
Network status
•
are connecting to is hidden or
WLAN network mode
•
Infrastructure, devices can communicate with each
other and with wired LAN devices through a WLAN
access point. If you select Ad-hoc, devices can send and
receive data directly with each other, and no WLAN
access point is needed.
WLAN security mode
•
security mode that is used in the WLAN access point. If
you select WEP (wired equivalent privacy), 802.1x or
WPA/WPA2 (Wi-Fi protected access), you must also
configure the relevant additional settings.
WLAN security settings
•
for the selected security mode.
Homepage — Enter the web address of the page you
•
want to display as the home page when you use this
access point.
To set up a WLAN access point automatically, use the WLAN
wizard. Select Menu Connectivity
>
© 2008-2009 Nokia. All rights reserved.
Wireless LAN.
— To enter the service set
Enter manually. To select the
Search for
— Select Hidden if the network you
Public if it is not hidden.
— If you select
— You must select the same
— Edit the security settings
WLAN wiz..
>
Advanced access point settings
for WLAN
Select Menu Tools
> >
points.
After setting up a basic access point for WLAN, select
Options Advanced settings
>
advanced settings:
IPv4 settings — Enter the device IP and name server
•
addresses for the IPv4 internet protocol.
IPv6 settings — Select or enter the name server
•
addresses for the IPv6 internet protocol.
Ad-hoc channel — The channel is usually chosen
•
automatically. To enter the channel number (1-11)
manually, select User
Proxy server address
•
Proxy port number
•
number.

Connect PC to web

You can use your device to connect your PC to the web.
1. Connect the data cable to the USB connectors of your
device and your PC.
2. Select Connect PC to
automatically installed from your device to the PC.
Settings Connection
>
and define the following
defined.
— Enter the proxy server address.
— Enter the proxy server port
web. The necessary software is
Internet
Access
>
71