Connect Pc To Web; Maps - Nokia E63 User Manual

Set up an access point for WLAN
manually
1. Select Menu Tools
>
Access points.
2. Select Options New access point
>
access point, or select an existing access point from the
list and then Options
the access point as a basis for the new one.
3. Define the following settings.
Connection name
•
connection.
Data bearer — Select
•
WLAN network name
•
identifier (SSID), that is, the name that identifies the
specific WLAN, select
network from the WLANs in range, select
networks.
Network status
•
are connecting to is hidden or
WLAN network mode
•
Infrastructure, devices can communicate with each
other and with wired LAN devices through a WLAN
access point. If you select Ad-hoc, devices can send and
receive data directly with each other, and no WLAN
access point is needed.
WLAN security mode
•
security mode that is used in the WLAN access point. If
Settings Connection
> >
to create a new
Duplicate access point
>
— Enter a descriptive name for the
Wireless LAN.
— To enter the service set
Enter manually. To select the
Search for
— Select Hidden if the network you
Public if it is not hidden.
— If you select
— You must select the same
you select WEP (wired equivalent privacy), 802.1x, or
WPA/WPA2 (Wi-Fi protected access), you must also
configure the relevant additional settings.
WLAN security settings
•
>
for the selected security mode.
Homepage
•
want to display as the home page when you use this
access point.
to use
To set up a WLAN access point automatically, use the WLAN
wizard. Select

Connect PC to web

You can use your device to connect your PC to the web.
1. Connect the data cable to the USB connectors of your
device and your PC.
2. Select Connect PC to
automatically installed from your device to the PC.
3. Accept the installation in your PC. If asked, accept also the
connection. When the connection to the web is
established, the web browser of your PC opens.
You must have administrator rights to your PC, and the
autorun option enabled in the PC. If not, run the setup.exe
file from the CD-ROM drive of your PC.
— Edit the security settings
— Enter the web address of the page you
Menu Connectivity
>
web. The necessary software is

Maps

WLAN wiz..
>
33