Edit Sip Profiles; Edit Sip Proxy Servers - Nokia E63 User Manual

3. Select WLAN security settings
EAP plug-in settings.
Use EAP plug-ins
To use an EAP plug-in when you connect to a WLAN using the
access point, select the desired plug-in and
Enable. The EAP plug-ins enabled for use with this access
point have a check mark next to them. To not use a plug-in,
select Options > Disable.
To edit the EAP plug-in settings, select
To change the priority of the EAP plug-in settings, select
Options Raise priority
>
before other plug-ins when connecting to the network with
the access point, orOptions
plug-in for network authentication after attempting to use
other plug-ins.
See the device help for more information on EAP plugins.
Session initiation protocol (SIP)
settings
Select Menu Tools
> >
settings.
Session initiation protocols (SIP) are used for creating,
modifying and terminating certain types of communication
sessions with one or more participants (network service).
Typical communication sessions are video sharing and net
calls. SIP profiles include settings for these sessions. The SIP
© 2008-2009 Nokia. All rights reserved.
WPA/WPA2
>
Options
Options > Edit.
to attempt to use the plug-in
Lower priority to use this
>
Settings Connection
>
EAP profile used by default for a communication session is
> >
underlined.
To create a SIP profile, select
Use default profile
To select the SIP profile you want to use by default for
>
communication sessions, select

Edit SIP profiles

Select Options
Profile name
•
Service profile
•
Default access point
•
the internet connection.
Public user name
•
your service provider.
Use compression
•
Registration
•
Use security
•
Proxy server
•
SIP profile.
Registrar server
•
SIP
for this SIP profile.
>

Edit SIP proxy servers

Select Options
Proxy servers are intermediate servers between a browsing
service and its users used by some service providers. These
Options
>
or Use existing profile.
Options
> Editand select from the following:
— Enter a name for the SIP profile.
— Select IETF or Nokia
— Select the access point to use for
— Enter your user name received from
— Select if compression is used.
— Select the registration mode.
— Select if security negotiation is used.
— Enter the proxy server settings for this
— Enter the registration server settings
New SIP profile or Edit
>
Settings
New SIP profile
>
Default profile.
>
3GPP.
Proxy server.
>
129