Operating Procedure - Haier HWM110-9188 User Manual

Operating procedure

1.Push the POWER button to switch on the power.
2.Push the PROGRAM button to select the suitable automatic program.
After switching on the power, the machine will set to standard program auto matically. To select other program, push the
PROGRAM button till the corresponding indicator is on. Refer to the PROGRAM button in Page 11.
For an example: select SPEEDY for the quick washing of the laundries with light dirt.
When a or
STANDARD MEMORY
texture and volume of the laundry.
3.Push PROCESS button to select suitable procedure
After switching on the power, the machine will set to WASH-RINSE-SPIN program automatically. That is the most
common program. To select other program, push the PROCESS button to select one or more procedures
among SOAK WASH RINSE SPIN .
Process Selection
Refer to the
Attention
Even there's no water in the tub, the spinning will start after a certain period.
Do not use the SOAK program for the woolen laundries.
Wash the laundries that are prone to lose colors separately from other laundries.
while washing soft laundries such as silk stockings and textile , please put into a wash net which can get by shopping.
cycle is selected, the fuzzy program is run. The water level can be selected according to be
Method for the selection in Page 11..
12
Page 11
Page 11