Test Mode; Service Mode - Samsung DV457EVGSGR/AA Technical Information

ALIGNMENT AND ADJUSTMENTS
To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before
servicing, unless testing requires power.

TEST MODE

Service Mode

* If "AE3" or "AE4" error occured, press the Start button then error will be cleared.
How to enter:
DV455*
- To enter Service Mode , press Wrinkle Prevent + Temp. Keys 3 seconds in normal mode until it sends
out a beeping sound.
- If pressing Wrinkle Prevent + Temp. Keys in Service mode , it will return Normal mode.
- Even though entering Service mode, the operating cycle will not be infl uenced.
DV457*
Method 1 : Select Title Option "1" on Course Selction Mode.  Press Extras for 3 Seconds.
-
Method 2 : Tap "2" three times  Tap "3" two times  Tap "2" once On the Progerss Mode.
-
Touch Sensor Data Display Mode
Defi nition of Sensor Bar Touch Data Mode:
- This mode is default mode of entering service mode.
How to enter:
DV455*
- Once the unit enters service mode, the mode changes to touch sensor display mode.
- This action will put the dryer into sensor bar touch data mode
- Dryer will display Sensor Bar data.
DV457*
- If the "6" button is pressed in service mode, the mode changes to touch sensor data display mode.
Technical_information-02835D-01_EN.indd 3 Technical_information-02835D-01_EN.indd 3
WARNING


3

2012-03-26 2012-03-26 2:28:49 2:28:49