Table of Contents
Advertisement
1
Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer
on.
Make sure the printer and computer are fully on and ready.
Do not connect the USB cable until instructed to do so on the screen.
2
Insert the Software and Documentation CD.
3
Click Install Printer and Software.
4
Click Agree to agree to the License Agreement.
5
Click Suggested, and then click Next.
6
Click Wireless Network Attach.
7
Temporarily connect a USB cable between the computer on the wireless network and the printer.
Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable so you
can print wirelessly.
1
1
Additional printer setup
2
2
27
Advertisement
Table of Contents
