Table of Contents
Advertisement
3
Press the arrow buttons until Quality menu appears, and then press
4
Press the arrow buttons until Color Adjust appears, and then press
Calibrating appears.
C
,
HECK THE DARKNESS
The Toner Darkness setting is too dark, the RGB Brightness setting is too dark, or the RGB Contrast setting is too high.
•
For Windows users: from Print Properties, select Print Quality and then select More Print Quality Options to
change these settings.
•
From the printer control panel Quality menu, change these settings.
•
For Macintosh users:
1
Choose File > Print.
2
Locate the drop-down box under the Orientation pictures, and then click the down button.
3
Click Printer Features.
4
Change the settings for Toner Darkness, Brightness, and Contrast.
T
HE PAPER HAS ABSORBED MOISTURE DUE TO HIGH HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
C
HECK THE PAPER
Avoid textured paper with rough finishes.
C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting matches the paper loaded in the tray:
1
From the printer control panel Paper menu, check the Paper Type setting.
2
Before sending the job to print, specify the correct type setting:
•
For Windows users, specify the type from Print Properties.
•
For Macintosh users, specify the type from the Print dialog.
T
HE IMAGING KIT MAY BE WORN OR DEFECTIVE
Replace the imaging kit.
Note: The printer has two types of imaging kits: a black and color imaging kit, and a black imaging kit. The black and
color imaging kit contains cyan, magenta, yellow, and black. The black imaging kit contains black only.
,
BRIGHTNESS
AND CONTRAST SETTINGS
Troubleshooting
143
.
.
Advertisement
Table of Contents
