–
Tap Speaker again to use the phone's earpiece (see "Using
the Speakerphone During an Active Call" on page 64). The
green line will disappear when Speaker is not activated.
•
Mute/Unmute turn the onboard microphone either on or off.
–
Tap Mute during a call to mute the microphone. A green line
will appear under the Mute button.
–
Tap Mute again to unmute the microphone. The green line will
disappear when Mute is not activated.
•
Headset connects to a Bluetooth headset.
–
Tap Headset during a call to activate a Bluetooth headset. A
green line will appear under the Headset button.
–
Tap Headset again to de-activate the Bluetooth headset. The
green line will disappear when the Headset is not activated.
•
Press
for more options:
–
Contacts: allows you to go to your Contact list.
–
Message: allows you to write a message during a call.
–
S Note: allows you to write a note using the S Note app.
–
Noise reduction on/off: allows you to turn on the Noise
reduction feature when you are in a noisy area. Turn it Off when
not needed to conserve battery power.
–
My call sound: assigns a sound equalizer preset for use during
an active call. Sometimes you might need the sound to be
softer, clearer, or optimized for one ear or the other.
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have
a call in progress if your network supports this service.
1. While on a call, tap Hold
the current caller on hold.
2. You can later reactivate this call by tapping Unhold
.
Unhold
To make a new call while you have a call in progress
1. Tap Hold
.
Hold
2. Tap Add call
to display the dialer.
3. Enter the new number and tap
Once connected, the active call will appear in a large
box at the top of your screen and the call on hold will
appear in a smaller box in the middle of your screen.
. This action places
Hold
.
Call Functions
62