Acquiring Satellite Signals - Garmin Rino 655t Quick Start Manual

3. Plug the small end of the AC
charger into the two-pin connector
.
➊
4. Charge the device completely.
Charging a fully depleted battery takes
6 hours.
installing the VHF
antenna
Note: Do not push Ptt when there
is no VHF antenna attached.
1. Select the proper antenna for the
area:
➊
Rino650NQuickStartManual
➊
➋
• If you are in Norway, select the
antenna with the notches
• If you are in Sweden, select the
antenna without notches
2. Screw the antenna into the VHF
antenna connector.
3. Hold to turn on the device.
4. Select Setup > Radio > Frequency
Band.
5. Select Norway or Sweden.
acquiring Satellite
Signals
It may take 30 to 60 seconds to acquire
signals.
1. Go outdoors to an open area.
2. Hold to turn on the device.
3. Wait while the device searches for
satellites.
A question mark flashes while the
device determines your location.
4. Select to open the status page.
.
➊
.
➋
5