Table of Contents
Advertisement
Step 3: Recharging the battery
To recharge the battery:
1.
Plug the computer into external power and maintain external power until the battery is fully
recharged. When the battery is recharged, the battery light on the computer turns off.
You can use the computer while the battery is recharging, but the battery will charge faster if the
computer is off.
2.
If the computer is off, turn it on when the battery is fully charged and the battery light turns off.
3.
Select Start > Control Panel > Performance and Maintenance > Power Options.
4.
Reenter the settings that you recorded for the items in the Plugged in column and the Running
on batteries column.
5.
Click OK.
CAUTION
may result in a complete battery discharge and potential information loss.
To reenable hibernation, select Start > Control Panel > Performance and Maintenance >
Power Options > Hibernate tab. Select the Enable hibernation check box, and then click
Apply.
ENWW
After calibrating the battery, reenable hibernation. Failure to reenable hibernation
Calibrating a battery
27
Advertisement
Table of Contents
