4
Power settings
This section explains the factory standby, hibernation, and shutdown procedures.
Turning the computer or display on or off
Task
Turn on the computer.
Shut down the computer.*
Turn off the display while
the power is on.
*If you have been registered to a network domain, the button you click will be called Shut Down instead of Turn Off Computer.
ENWW
Procedure
Press the power button.
1.
Save your work and close all open
applications.
2.
Shut down the computer through
the operating system by selecting
Start > Turn Off Computer > Turn
Off.*
Close the computer.
Result
●
The power light turns on.
●
The operating system loads.
●
The power light turns off.
●
The operating system shuts down.
●
The computer turns off.
Closing the computer activates the display switch,
which turns off the display.
Turning the computer or display on or off
9