HP 4510s - ProBook - Celeron 1.8 GHz Maintenance And Service Manual page 91

Service guide
Hide thumbs Also See for 4510s - ProBook - Celeron 1.8 GHz:
Table of Contents

Advertisement

4.
Remove the hard drive (4) from the hard drive bay.
5.
If it is necessary to replace the hard drive bracket, remove the two Phillips PM3.0×4.0 hard drive
bracket screws (1) from each side of the hard drive.
6.
Lift the bracket (2) straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
Component replacement procedures
79

Advertisement

Table of Contents
loading

This manual is also suitable for:

Probook 441sProbook 4410s

Table of Contents