Top Cover - HP 4510s - ProBook - Celeron 1.8 GHz Maintenance And Service Manual

Top cover

NOTE: The top cover removal procedures differ for 15-in computers from those of 14-in computers.
NOTE: You must remove the top cover before you can remove the display assembly on computers
with 14-in displays. You do not have to remove the top cover to remove the display assembly on
computers with 15-in displays.
Description
Top cover for use in computers with 15-in displays
Top cover for use in computers with 14-in displays
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a.
b.
c.
d.
Remove the top cover:
NOTE: Steps 1 through 5 illustrate how to remove the top cover from computers with 15-in displays.
Steps 6 through 10 illustrate how to remove the top cover from computers with 14-in displays.
1. Position the computer right-side up with the front toward you.
90 Chapter 4 Removal and replacement procedures
Battery on page
Switch cover and keyboard (see
Speakers (see Speakers on page
Optical drive (see Optical drive on page
Palm rest (see Palm rest on page
63).
Switch cover and keyboard on page
73)
69)
75)
Spare part number
535866-001
535865-001
64)