Setting The Resolution - Eizo FlexScan F520 User Manual

Eizo nanao color display monitor user's manual flexscan f520
Hide thumbs Also See for FlexScan F520:
Table of Contents

Advertisement

WARNING
• Use the enclosed power cord. If using the power cord other than the enclosed
one, use the following cord.
In USA and Canada, use a UL LISTED/CSA LABELED or CERTIFIED power cord set
meeting the following specifications:
* Rating:
* Plug type: NEMA 5-15P, Parallel blade, Grounding type, 125 V, 10 A
In Europe, use a proper European standard approved power cord meeting the
following specifications:
* Rating:
* Type:
Use a plug type approved by the country where you use
Failure to do so may cause fire or electric shock.
5) Turn on the monitor first, then the PC. The monitor's power indicator will light up
(green). The monitor will warm up briefly, then display an image. Whenever
finishing your operation, turn off the PC and the monitor.
• If an image does not appear, refer to the "TROUBLESHOOTING" section on
page 15 for an advice.

1-2. Setting the resolution

The following look-up table shows the maximum (Non-interlaced) vertical refresh
rates for this model with regard to standard resolutions set forth by VESA. The
best way to see if the monitor will work with a given resolution and rate, is to
compare the vertical refresh rate of the graphics board to the monitor's range (Refer
to the graphics board manual for specifications). If the refresh rate is within the
specified range of the monitor, it should operate properly.
Horizontal Scan
Frequency (kHz)
30-96
What is Resolution?
Resolution is expressed as the number of dots (pixels) displayed on the screen. A
larger number of dots produces a more sharply defined (a higher-resolution) image.
Note that for a given screen size the dot size decreases as the number of dots
increases: a 640 × 480 (dot × line) resolution uses larger pixels than a 1024 × 768
resolution. The display size of a given font therefore varies according to the
resolution. Higher resolutions allow you to display more information on the screen.
min. 125 V, 10 A
min. 250 V, 10 A
H05VV-F 3G 1 mm
2
Maximum Vertical Refresh rate (Hz)
640x480
800x600
160
144
* Length: max. 2.0 m
* Length: max. 2.0 m
1024x768 1280x1024 1600x1200
118
1
* Type: SVT
89
76
9
INSTALLATION
E

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents