F67/Fx·d7 - Eizo FlexScan F67 User Manual

F67/FX·D7
Electrical Specifications
CRT
CRT Dot Pitch
Scan Frequency
Horizontal:
Vertical:
Max. Active Display Area
Power Supply
Power Consumption
Normal/Max:
PowerManager Mode 1:
PowerManager Mode 2:
Input Connector
Recommended Resolution
nput Signal
Sync:
Video:
Mechanical Specifications
Dimensions
Weight
USB Specifications
USB standard
Downstream power supply
Communication speed
USB ports
Environmental Specifications
Temperature
Humidity
Certifications and Standards
100-120 VAC range
220-240 VAC range
50
6 SPECIFICATIONS
50 cm (19 inch) class, 90° deflection FS type CRT with
Anti-Reflective SuperErgoCoat
0.26 mm
30 kHz-96 kHz (Automatic)
50 Hz-160 Hz (Automatic)
363 mm (H) × 272 mm (V) (14.2"
(Diagonal: 453 mm (17.8"))
* Display size can be set by the user through
microprocessor control panel.
* The actual size displayed can be dependent on the
graphics board or PC utilized.
100-120/220-240 VAC±10%, 50/60 Hz, 1.6/0.8 A
120 W/150 W (with EIZO optional speaker & USB attached)
Less than 10 W *
Less than 3 W * (* When the USB hub is not connected)
D-Sub mini 15-pin and BNC × 5 (switchable)
1280 dots × 1024 lines
• H/V Separate, TTL, Positive/Negative
• H/V Composite, TTL, Positive/Negative
• Sync on Green 0.3 Vp-p, Negative
• Analog 0.7 Vp-p/75 , Positive
452 mm (W) × 455 mm (H) × 478 mm (D)
(17.8" (W) × 17.9" (H) × 18.8" (D))
24.0 kg (52.9 lbs.)
Rev. 1.0 complied self-powered hub
500 mA for each (Max.)
12 Mbps (full), 1.5 Mbps (low)
Upstream port x 1, Downstream ports x 4
operating: 0°C to 40°C (32 °F to 104 °F)
storage: -20°C to 60°C (-20 °F to 140 °F)
30% to 80% R.H. Non-condensing
UL/CSA, FCC-B, DHHS, TÜV Rheinland/Ergonomics
Approved, TCO'99, EPA Energy Star
CE, CB, TÜV Rheinland/GS, TÜV Rheinland/Ergonomics
Approved, TCO'99, EPA Energy Star
®
× 10.7" (V))
®
Program
® Program