Table of Contents
Advertisement
Menu Position, Menu Contrast
Use these functions to adjust the position and contrast of the
ScreenManager menu. The menu contrast can be set from level 0 (mini-
mum setting) to 5 (maximum setting).
Signal Filter
This monitor provides two display modes according to the characteristics of
each graphics board for displaying the image properly. If the characteris-
tics of the graphics board does not match those of the monitor, the
characters and images displayed may have a slight shadow on their right
side (refer to figure below). If this phenomenon is noticeable, use the
"Signal Filter" function. Select either mode 1 or mode 2, whichever
displays the image better.
Reset
Use this function to return all ScreenManager parameters (size, position,
geometry, color, PowerManager etc.) to their factory default settings.
Default settings are as follows.
• Screen:
• Color:
• PowerManager:
• Others:
• Language:
Moiré = OFF
Standard/9300K
VESA/5 sec.
Input Priority = D-Sub
Beep = ON
Signal Filter = Mode 1
English
2
SCREEN ADJUSTMENT
E
35
Hide quick links:
Advertisement
Table of Contents
