Toshiba 46RV525RZ Owner's Manual page 39

To select the picture size using the menus:
1
Select
Picture Size
in the
Theater Settings
menu.
2
Press .... or ~ to select the desired picture size
setting.
3
Highlight
Done
and press
8.
Note: Some of the picture sizes may not be
available depending on the receiving signal
format (those will be "grayed out" in the Picture
Size screen).
j/Pictufe.
Size>.' .
TheaterWide 2
(for letter box programs)
loooHOOOI
0 0 0
000
The top and bottom edges of the picture may be
hidden*.
Some program formats will display with sidebars
and/or bars at the top and bottom.
Note: If you select one of the TheaterWide®
picture sizes, the top and bottom edges of the
picture (including subtitles or captions) may be
hidden. To view the hidden edges, either scroll
the picture (TheaterWide 2 and 3 only) or try
viewing the program in Full or Natural picture
size.
000
000
• If receiving a squeezed 4:3 format program, the
picture is stretched wider to fill the width of the
screen, but not stretched taller.
• None of the picture is hidden.
4:3 HD
(for 72Dp, 1D8Di, and 1D8Dp program
sources only)
ooo~o
0 0
0 0 0 0 0 0
."t1CIlLIf;..
-I ..
"OCUtf
a . _
The top and bottom edges are hidden*.
TheaterWide 3
(for letter box programs with
subtitles)
Full
(for 16:9 [48Di, 48Dp] source
programs only)
IOOOHOOO!
000
000
000
000
Using these functions to change the
picture size (i.e., changing the height!
width ratio) for any purpose other than your
private viewing may be prohibited under
the Copyright Laws of the United States
and other countries, and may subject you
to civil and criminal liability.
Natural
1
00
°lq
000
TheaterWide 1
(for 4:3 format programs)
1000HOOOI
000
0 0 0
The center of the picture remains close to its original
proportion, but the left and right edges are stretched
wider to fill the screen.
Picture is not distorted from original size.
(con! i nued)
39
I