Installing The I/O Panel; Removing The Processor - Dell Vostro 270s Owner's Manual

Installing the I/O Panel

1. Insert the I/O panel into the slot on the front panel.
2. Slide the I/O panel to align it with the screw holes on the front panel.
3. Tighten the screw to secure the I/O panel to the front panel.
4. Route the I/O panel cables through the routing channels on the chassis.
5. Connect the I/O panel cables to the system board.
6. Install:
a) expansion card
b) drive cage
c) front bezel
d) fan shroud
e) cover
7. Follow the procedures in

Removing the Processor

1. Follow the procedures in
2. Remove:
a) cover
b) fan shroud
c) heat-sink assembly
3. Press the release lever down and then move it outward to release it from the retention hook. Lift the processor
cover and remove the processor from the socket, and place it in antistatic bag.
After Working Inside Your Computer .
Before Working Inside Your Computer .
19