The Shoulder Rest - Yamaha Silent Violin SV250 Owner's Manual

● Winding the Strings
(Please refer to this section when changing the strings)
1
Before you string the instrument, set the adjuster so that it is in
the middle of its adjustment range. (All adjusters)
2
Place the ball (on the end of the string) in the notch on the adjust-
er. Make sure the ball is properly inserted in the adjuster's notch.
3
After threading the string through the hole in
the tuning peg, turn the tuning peg making one
wrap on one side of the hole and the remaining
wraps on the other side as shown in the diagram
on the right.
3rd string (D)
4th string (G)
SV250

■ The Shoulder Rest

A commercially available violin shoulder rest (4/4
size) can be attached to the instrument.
* Some shoulder rests are incompatible (air cushion
type, etc.).
14
2nd string (A)
1st string (E)
String
Adjuster's notch
Ball
Winding the 3rd,
4th and 5th strings
Remaining 1st
winds wind
3rd string (D)
4th string (G)
5th string (C)
SV255
Shoulder rest
The adjuster
should be set to
the middle of its
adjustment range.
Winding the 1st and
2nd strings
Remaining
1st
winds
wind
2nd string (A)
1st string (E)