Eizo ColorEdge CG241W User Manual page 11

Priority setting
1
2
Manual
NOTE
• When the "1" or "2" is selected, the power saving mode of the monitor activates only if both PCs are
in power saving mode.
If signals from both inputs are present, the monitor gives preference to
Signal 1 in the following cases.
• When the power of the monitor is turned ON.
• When the signal input to Signal 1 is changed even if active input was
Signal 2.
If signals from both inputs are present, the monitor gives preference to
Signal 2 in the following cases.
• When the power of the monitor is turned ON.
• When the signal input to Signal 2 is changed even if active input was
Signal 1.
The monitor will not detect signals automatically in this mode. Select the
active input by pressing
Performance
.
2. Installation
11