Updating The Software - Yamaha mLAN Installation Manual

Here's how to update the old version of mLAN Driver/mLAN Tools you're currently using to the new version, or how to change
the n Driver or AI Driver you're currently using to mLAN Driver/mLAN Tools. If you're installing mLAN Driver/mLAN Tools for
the first time, refer to page
You must use the following procedure to update mLAN Driver/mLAN Tools.
1 Check the version of mLAN
Driver/mLAN Tools
Check the version of the currently installed mLAN Driver/
mLAN Tools as follows.
1-1 After the downloaded compressed file is properly
extracted, double-click the "setup.exe" file.
The maintenance window appears.
NOTE
• When using Windows Vista, click [Continue] if the "User
Account Control" window appears. After that, the maintenance
screen will appear.
1-2 Check the "Installed Software" section.
If the currently installed software is "mLAN Applica-
tions for Yamaha" and the version is the latest version,
you don't need to update.
1-3 Click [Cancel] to close the maintenance window.
NOTE
• If the n Driver, AI Driver, or mLAN Driver/mLAN Tools has not
been installed, mLAN Driver/mLAN Tools Installer starts after
double-clicking the "setup.exe" file.

Updating the software

5.
1 Check the version of mLAN Driver/mLAN Tools
2 Save the mLAN connection settings
3 Upgrade the firmware of the mLAN device
4 Prepare to install
5 Update the software
6 Recalling the mLAN connection settings
2 Save the mLAN connection
settings
This process is necessary so that you can recall the mLAN
connection settings after the update operation. In mLAN
Graphic Patchbay, save the current settings as a file (*.ymp)
or template file (*.ymt) from the File menu.
After the update operation,
nection settings by using mLAN Auto Connector or open-
ing the file (saved here) from the File menu of mLAN
Graphic Patchbay.
NOTE
• When using n Driver or AI Driver, or using the mLAN connection
set by Connection Manager automatically, it is not necessary to
save the mLAN connection settings, since Connection Manager
will recall the settings automatically after the update operation.
mLAN Driver/mLAN Tools Installation Guide
you can recall the mLAN con-
25