Advanced Song Playback; Using The Timer Play - Yamaha disklavier DKC-850 Function Manual

Advanced Song Playback

Using the Timer Play

[SETUP] "TimerPlay"
You can program your Disklavier to start or stop playback of a song at
various specified times. All you need to do is register up to a maximum of
99 timer settings, and your Disklavier will perform them unattended. This
function is called "timer play."
The following functions are available in Version 3.10.
The functions you can set for the timer play have been
expanded.
The following functions are available:
PLAY Starts playback of songs.
STOP
Stops playback of songs.
RND Starts playback of songs at random.
OFF Turns off the Disklavier (standby mode).
When "PLAY" or "RND" is selected, the album selection parameter
appears.
"Radio" has been added in the album selection.
The following selections are available:
Mem01 - Albums (01 - 99) in the internal flash memory.
Mem99
Lst01 -
Playlists (01 - 99) created in the internal flash memory.
Lst99
Radio The last DisklavierRadio channel you have listened to.
----- Current selected song.
English
=TimerPlay= 
>TimerPlay=ON
01[### ##:## PLAY -----]
=TimerPlay= 
>TimerPlay=ON
01[### ##:## PLAY Mem01]
-+
-+
Note:
You cannot select "Radio" if you
select "RND" for the function.
Note:
When "Radio" is selected, the
Disklavier will connect to the
Internet one minute prior to the time
you have set, and the channel
selection screen appears.
DisklavierRadio will begin to play at
the designated time.
Continued on next page
3