Advertisement
7
C# D#
C D
E F G A B C D E F
8
D
D
Damper Pedal
8
Accidental tones
F# G# A#
C# D#
Natural tones
7
Hanging the sound columns from the
hanger.
Make sure that the damper is disengaged (the
damper stopper is set).
* If the damper is engaged, press down on the
damper pedal, then push down on the damper
stopper and release the damper pedal to en-
gage the damper stopper.
Hang the sound columns starting with the acci-
dental tones before hanging the natural tones.
Make sure that the pitch name is facing forward
then place the string into the guides on the fixing
pins and hook the string on the hanger pin. Make
sure that the knot in the string is not in contact
with the hanger pin.
Sound Column
8
Adjust the damper pedal.
Loosen screw D to adjust the angle of the damper
pedal, and then tighten screw D to secure. The
pedal is best positioned when it lies slightly above
the floor when pressed all the way down.
D
Disassembly is performed simply by revers-
ing the assembly order.
Fixing Pin
String
Hanger Pin
Fixing Pin
Teflon Tube
Advertisement
