Eizo eClient 630LT-GR-N User Manual page 55

Using the 630LT-GR/630LT-GR-N as a FTP server
The firmware file can be updated by the 630LT-GR/630LT-GR-N set as a FTP server
when two or more 630LT-GR/630LT-GR-N exists on the same network
NOTE
• This updating is available for OS file (NK.bin) only.
630LT-GR/630LT-GR-N
(FTP Server)
1.
Update a 630LT-GR/630LT-GR-N firmware.
Refer to the previous section for the updating procedure.
2.
Set the FTP Server setting of the 630LT-GR/630LT-GR-N updated
on Step 1.
(Refer to page 48 for the FTP service settings.)
3.
Update the other 630LT-GR/630LT-GR-N.
Specify the 630LT-GR/630LT-GR-N for FTP server in the [Settings] (Refer to
below).
[Server:] .............................Type IP address or full domain name of the 630LT-
[User Name:]/[Password:] ...Type the user name and password to connect the FTP.
[File Name:] ........................Type the NK.bin
Update
Update
630LT-GR/630LT-GR-N
GR/630LT-GR-N.
7. SOFTWARE UPDATING/INSTALLATION
FTP Server
55