Lan Settings - Canon 3747B003 User Manual

Advanced Guide > Changing the Machine Settings

LAN settings

WLAN active/inactive
Activates/deactivates wireless LAN.
Wireless LAN setup
Selects the setting method for wireless LAN connection.
Note
You can enter this setting menu by following the procedure below:
1. Select Settings on the HOME screen, then press the
2. Select Wireless LAN setup.
In this case, activate wireless LAN.
Easy settings
Select when you perform settings for wireless LAN manually.
WPS settings
Select when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS). Select
Push button method or PIN method according to the method your access point supports, then
follow the on-screen instructions.
WCN settings
Select when you perform settings for wireless LAN using Windows Connect Now (WCN)
feature. You need a USB flash drive on which settings for wireless LAN are saved.
Confirm LAN settings
The list of wireless LAN settings of this machine is displayed on the LCD.
You can print the list from this setting menu.
Wireless LAN setting list
The list of wireless LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.
Items
Connection
SSID
Communication
mode
Channel
Wireless LAN
security
IP address
Subnet mask
Subnet prefix
length
Default gateway
MAC address
IPsec setting
Pre-shared key
> Changing the Machine Settings on the LCD
Setting (IPv4)
Active/Inactive
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
Infrastructure
XX
Disable/WEP(64bit)/WEP(128bit)/
WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)
XXX. XXX. XXX. XXX
XXX. XXX. XXX. XXX
-
XXX. XXX. XXX. XXX
XX:XX:XX:XX:XX:XX
-
-
> LAN settings
OK button.
Setting (IPv6)
Active/Inactive
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
Infrastructure
XX
Disable/WEP(64bit)/WEP(128bit)/
WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)
XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX
-
XXX
XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX
XX:XX:XX:XX:XX:XX
Enable (ESP)/Enable (ESP & AH)/
Enable (AH)/Disable
XXXXXXXXXXX