Brother 8840DN - B/W Laser - All-in-One Quick Setup Manual page 24

Brother Native driver Installation
K
Click Start and select Printers and Faxes.
Click on Add a printer and the Add Printer
Wizard will start.
When this screen appears, click Next.
L
Un-check the Automatically detect and
install my Plug and Play printer selection
and then click Next.
M
Select USBXXX from the pull down window
for the Printer Port Selection and then click
Next.
N
Click on Have Disk.
O
Browse the CD-ROM and highlight your
language folder and click Open. Highlight
the WXP folder and click Open. Highlight
the Addprt folder and click Open.
P
Click Open.
Q
Make sure X:\ENG\WXP\Addprt is
displayed in the window and click OK (X:\ is
the drive letter of your CD-ROM).
Continued...
23