Changing Camera Settings - HTC Wildfire S T-Mobile User Manual

85 Camera

Changing camera settings

Open the menu panel to access and change camera settings.
To open the camera settings, press
Self-portrait (photo
mode only)
Self-timer (photo mode
only)
Image adjustments
White balance
Resolution/Video
quality
ISO (photo mode only)
Review duration
Widescreen (photo
mode only)
Geo-tag photos (photo
mode only)
Auto enhance (photo
mode only)
Auto focus (photo
mode only)
Face detection (photo
mode only)
Shutter sound
Grid (photo mode only) Select to display a grid on the Viewfinder screen so you
.
Select this option to take your own closeup shot.
Set a time delay before your camera automatically takes
the photo.
Slide your finger across each of the slider bars to adjust the
exposure, contrast, saturation, and sharpness.
White balance enables the camera to capture colors more
accurately by adjusting to your current lighting
environment.
Choose a photo or video resolution to use.
Choose an ISO level or set it back to Auto. Higher ISO
numbers are better for taking pictures in low light
conditions.
Set the time for a captured photo or video to be displayed
on the Review screen before the camera changes back to
the Viewfinder screen.
When this check box is selected (default), photo
resolutions available for selection are in 3:2 ratio and you
can use the entire Viewfinder screen to frame your subject.
When not selected, photo resolutions available for selection
are in standard 4:3 ratio.
Select to store GPS location in your captured photos.
Select to reduce noise when using a high ISO setting and to
automatically adjust photo brightness.
Enables or disables centered auto focus.
Select to automatically recognize faces and adjust the
focus when you take people photos. Face detection will be
turned off if you disable auto focus.
Select to play a sound when you press the shutter release
or record button.
can easily frame and center your subject before taking the
photo.