Assembling The Blades - Hunter 25703 Owner's Manual

Hunter fans use several styles of fan blade irons (brackets that hold the
blade to the fan) .
6-1 . Your fan may include blade grommets . If your fan has grommets,
insert them by hand into the holes on the blades .
6-2 . Attach each blade to a blade iron using three blade assembly
screws . If you used grommets, the blades may appear slightly loose
after screws are tightened . This is normal .
6-3 . Remove the blade mounting screws and rubber shipping bumpers
from the motor . Note: Some blade mounting screws are installed
in the motor to secure shipping blocks .
6-4 . For each blade, insert one blade mounting screw through the
blade iron, and attach lightly to the fan . Insert the second blade
mounting screw, then securely tighten both mounting screws .
Use with grommet
Use without grommet
6 • Assembling the Blades
Blade Assembly
Screws
Blade
Mounting
Screw
11
42823-01 • 04/13/10 • Hunter Fan Company
Step 6-1 (Detail)
Grommet
Step 6-4
Steps 6-1 – 6-2