One-Year Limited Warranty ........9 Introduction Congratulations on your purchase of a high-quality Rocketfish product. Your RF-LAPCOL Laptop Cooling Stand represents the state of the art in laptop cooling stand design and is designed for reliable and trouble-free performance. Using the cooling stand You can use the cooling stand with or without running the fan.
Page 3
To set up the cooling stand: 1 Open the cover on the bottom of the cooling stand. 2 Pull the USB cable from inside the compartment, then clip the cable into the cable guide. RF-LAPCOL...
Page 4
3 Close the cover. 4 Plug the USB cable into a USB port on your laptop. The cooling fan turns on.
Page 5
5 To adjust the height of the cooling fan, pull out the support on the bottom of the stand. 6 Make sure that the support is fully extended for correct alignment. RF-LAPCOL...
7 Place your laptop on the center of the cooling fan. Specifications Fan power source USB connection to laptop Fan type 70 mm, 11-blade blower Fan MTBF 25,000 hours (approximately 3 years of continuous use Screen height Without feet: 1.38" (35 mm) adjustment With feet: 1.81"...
Products and parts replaced under this warranty become the property of Rocketfish and are not returned to you. If service of Products and parts are required after the Warranty Period expires, you must pay all labor and parts charges.
Page 10
• Products where the factory applied serial number has been altered or removed REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY. ROCKETFISH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS.