Setting Lcd Save; Setting Date & Time; Setting Language; Setting Display Mode - HP s510 User Manual

Setting LCD Save

Enable the LCD Save function to automatically decrease the LCD
brightness to conserve battery power. When the camera is idle
for 20 seconds, the LCD darkens. Press any button to resume to
normal brightness.
The camera is idle and enters LCD Save mode when no
•
buttons are pressed. LCD Save, though enabled, does not
function during video playback, slideshow and video
recording.
Setting Date & Time
Use the Date & Time function to set the date and time of your camera. This function is useful in attaching
date stamps on captured photos. Your camera uses a 24-hour time format.
1. Press the navigation controls to adjust date and time
value. By holding down Up/Down key on the navigation
control, the numeric values changes continuously.
2. Press the OK button to apply changes.

Setting Language

Specify in which language menus and messages are to be displayed on the LCD monitor.
1. Use the navigation control to scroll through the list and
select the desired language.
2. Press the OK button to confirm and apply settings.

Setting Display Mode

This function controls the icon display on LCD monitor for both
Record mode and Playback mode.
Available settings are: On, Detailed, Off.
If set Display Mode to Off, the mode icon and remaining shots
will display for 2 seconds in following situations:
• Power on the camera
• Switch from Playback to Record mode
• After shooting
• Close the menu and back to preview
57