Chapter 5: Using Stored Lists (EDIT)
4. Use the trackpad up and down edges to move up and down the list,
Waypoint List Operations
With the Waypoint List displayed, you can use the soft keys to perform
the following tasks:
GOTO
FIND
DELETE
EDIT
Finding a Waypoint in the List
To find a waypoint in the list:
1. Press the FIND soft key. The Find Waypoint window is displayed,
The box below the list gives the following details for the highlighted
waypoint:
•
Position, in either latitude and longitude or TDs, depending on
your setup
•
Bearing and range from your vessel's current position
•
Source of position data (cursor, edit, GPS etc)
•
Depth and temperature when the event waypoint was created, if
available
•
Date and time that the waypoint was created
displaying the details for each waypoint in turn.
Starts tracking towards the highlighted waypoint.
The Waypoint List is cleared and the chart is
displayed.
Finds a specified waypoint in the Waypoint List
(see below).
Deletes the highlighted waypoint from the list.
Press ENTER to confirm the deletion, if the
waypoint is active or part of an existing route.
Allows you to edit the highlighted waypoint, or
add a new waypoint (see below).
with the currently highlighted waypoint name and symbol displayed.
D3813-1
47