Chapter 7: Installation
Chapter 7: Installation
7.1 Introduction
This chapter explains how to install the RayChart 620.
The RayChart 620 can be trunnion (yoke) or panel mounted. It must be
connected to a power supply and to a position fixer, and can also be
connected to other units via the SeaTalk or NMEA connections.
You can install more than one RayChart 620 as part of a larger system.
Details of the current route or GO TO are sent to the second unit.
An example of an extended system is shown in the following diagram.
Note: Before attempting any installation, you should read the
Electromagnetic Compatibility (EMC) installation guidelines provided in
Section 7.3.
77