Waypoint Name; Waypoint Display; Course Vector - Raytheon RayChart 620 Operation Manual

Chapter 6: Customizing the RayChart 620
Parameter

Waypoint Name

Waypoint Display

Course Vector

Heading Vector
Wind Vector
Tide Vector
Dead Reckoning
Cursor Data Box
Waypoint Name
This option controls the number of characters of each waypoint name
that are displayed on the chart. Reducing or removing the waypoint
name can sometimes improve the readability of the chart.
Waypoint Display
This option controls whether or not the waypoints and events are
displayed on the chart. If you set it to OFF, only the waypoints in the
selected and active routes and the active waypoint (if any) are
displayed.
Course Vector
When the Course Vector is switched on, your vessel is displayed on the
chart with a line extending from the bow indicating the current course.
You can select the length of the vector line; an "infinite" vector extends
to the edge of the chart or to land.
The Course Vector is only displayed if you a tracking to a waypoint.
Options
3 characters
6 characters
16 characters
None
OFF
ON
OFF
SHORT
LONG
INFINITE
OFF
SHORT
LONG
INFINITE
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Factory New
Default Default
6 characters
ON
SHORT
SHORT
OFF
OFF
OFF
ON
65