Using The Go To Key; Tracking To A Target Point - Raytheon RayChart 620 Operation Manual

Chapter 3: Controlling the Chart and Using the Default Soft Keys
4. To obtain all the information available at this location, press the
5. Press CLEAR to clear the detailed information display, and return to
6. Press CLEAR to return to the default display.

3.3 Using the GO TO Key

The GO TO default soft key provides a quick method of navigating to a
target point. You can select any target point (which is then stored as a
new waypoint) or an existing waypoint.
Note: You can also search for a specific waypoint and track towards it
using the Waypoint List options (see Chapter 5).

Tracking to a Target Point

To navigate to a target point:
1. Use the trackpad to position the cursor on the target point.
2. Press GO TO.
If there is more than one page of information for the object, you
can page through it using the PAGE DN soft key, and go back to
the beginning using the RESTART soft key.
d. Press CLEAR to return to the expanded list, and select another
object if required.
e. Press CLEAR to clear the expanded information display, and
return to the EXPAND and ALLINFO soft key display.
ALLINFO soft key.
The information is displayed in the same way as the expanded data,
but includes additional information such as the depth range and the
source of the data.
the EXPAND and ALLINFO soft key display.
Unless you are already tracking to a waypoint (see below), the
RayChart saves the target point as a new waypoint and starts
tracking towards it. If your target point is an existing waypoint, its
position is used and a new waypoint is not created.
D3823-1
21