Looping A Section Of A Disc - Pioneer DV-310-K Operating Instructions Manual

• When a JPEG file is highlighted, a
thumbnail image is displayed on the right.
00:00/ 00:00 0kbps
Folder 2
File1
File2
File3
File4
File5
3 To play the highlighted track or
DivX video/WMV file or display the
highlighted JPEG file, press ENTER.
• When a MP3/WMA/MPEG-4 AAC or
DivX video/WMV file is selected, playback
begins, starting with the selected file, and
continues until the end of the folder.
• When a JPEG file is selected, a slideshow
begins, starting with that file, and
continues to the end of the folder.
Tip
• You can also play a JPEG slideshow while
listening to MP3/WMA/MPEG-4 AAC
playback. Simply select the audio file you
want to listen to followed by the JPEG from
which you want the slideshow to start.
Playback of both the slideshow and the
audio files repeats.
• To play the contents of the whole disc
rather than just the current folder, exit the
Disc Navigator and start playback using
the  PLAY button.

Looping a section of a disc

The A-B Repeat function allows you to specify
two points (A and B) within a track (CD,
Video CD/Super VCD) or title (DVD-Video and
DVD-RW) that form a loop which is played over
and over.
• You can't use A-B Repeat with Video CD/
Super VCDs in PBC mode, or MP3/WMA/
MPEG-4 AAC/DivX video/WMV files.
1 During playback, press PLAY MODE
and select 'A-B Repeat' from the list of
functions on the left.
Play Mode
A-B Repeat A(Start Point)
Repeat B(End Point)
Random Off
Program
Search Mode
2 Press ENTER on 'A(Start Point)' to set
the loop start point.
3 Press ENTER on 'B(End Point)' to set the
loop end point.
After pressing ENTER, playback jumps back to
the start point and plays the loop.
4 To resume normal playback, select 'Off'
from the menu.
05
27
En