Lenovo ThinkPad R60 9457 Supplementary Manual page 47

15. Push gently on the area marked in this figure, in the direction shown by
the arrow, until you hear a click.
16. Push the front side of the palm rest until it clicks into place.
17. Close the computer display, and turn the computer over; then replace the
screws that secure the palm rest.
18. Reinstall the battery.
19. Turn the computer over again, and re-connect the ac adapter and the
cables to the computer.
To make sure that the SO-DIMM is installed correctly, do as follows:
1. Turn the computer on.
2. While the "To interrupt normal startup, press the blue ThinkVantage
button" message is displayed at the lower-left of the screen, press the
ThinkVantage button. ThinkVantage Rescue and Recovery screen opens.
3. Click Access BIOS. The System Restart Required window is displayed.
Chapter 5. Upgrading and replacing devices
Replacing memory
39