Table of Contents
Advertisement
Playing back Discs
You can play back discs at various speeds, and resume playback in various
ways. Use the remote controller for the following functions.
Direct Playback, Stop and Pause
Direct Playback via the On-Screen Menu
1. Switch on your TV set.
2. Select the desired title using the
/
/
or the number buttons.
3. Press the ENTER button.
The DVD Changer starts playing back the selected title.
• If you do not need the menu functionality of PBC-encoded
Video CDs, set the "PBC" function to "Off". See page 38.
Pausing Playback: Still mode
1. To pause playback, press the
• The sound is muted during still mode.
2. Press the
PLAY button to resume playback.
Note:
The DPC-5.1 also provides a function for optimum display of still pic-
tures (only available for DVD video discs). See "Pause/Still" on page 37.
Stopping Playback
Press the
STOP button.
If you do not wish to resume playback from this
position, see "Resuming Playback from the Beginning
of the Current Title" on page 17.
Removing a Disc
1. Stop playback.
2. Press the
OPEN/CLOSE button.
3. Wait until the disc drawer has opened completely,
then remove the disc.
Notes:
•Do not move the DPC-5.1 during playback or subject it to
strong vibrations to avoid damaging the discs.
•Use the
OPEN/CLOSE button on the r e mote controller or
DVD player to open and close the disc drawer. Do not
obstruct the disc drawer while it is moving. Doing so may
cause the DVD Changer to malfunction.
•Do not push up the disc drawer or put objects other than discs
on it. Doing so may cause the DVD Changer to malfunction.
•In many instances, a menu scr een will appear after playback of
a movie is completed. Prolonged display of such a menu may
damage your television set, permanently etching that image
onto the screen. To avoid this, press the
remote controller once playback of the movie is finished.
•If you pause a picture and leave it still for a long time, the
screen saver of the DPC-5.1 is automatically activated
(provided the "Screen Saver" function is set to "On", see page
37). To deactivate the screen saver and resume playback,
press the
PLAY button.
16
(continued)
2
8
Fast reverse
Slow-
Fast forward
Motion
DVD
VCD
/
ENTER
PAUSE/STEP button.
• The DVD Changer does not play back sound or
STOP button on your
• The x2, x8 and x30 speeds are only approximate
30
Last
Play
Fast Reverse and Fast Forward Playback
Press the FR (fast reverse) or FF (fast
FR
forward) button during playback.
• DVD video discs
The playback speed changes to twice the
normal speed in the selected direction.
FF
Press the button again to further increase
the fast forward or reverse speed.
FR: press this button to quickly return
to an earlier position.
FF: press this button to advance to a
position behind the current
position.
TV screen
2
X2 the normal
speed
The direction of the arrow varies
depending on the button you press.
• VIDEO CDs/Audio CDs
For Video and Audio CDs, there are
FR
two fast forward and reverse speeds.
TV screen
FR1
FF
FF1
Resuming Normal Playback after Fast Forward-
ing/Reversing
PLAY
After locating the desired position,
press the
normal playback.
subtitles during fast reverse or forward scans of DVD
video discs. The sound of audio CDs, however, is
played back at the selected scrolling speed.
values. They may vary slightly from disc to disc.
FR
PLAY
FF
OPEN/CLOSE
PAUSE/STEP
STOP
/ / / ,
ENTER
1
2
3
4
5
6
7
8
9
+10
0
REMOTE CONTROLLER
RC - 422 DV
DVD
VCD
CD
8
30
X8 the normal
X30 the normal
speed
speed
FR2
Fast reverse
playback
FF2
Fast forward
playback
PLAY button to resume
Advertisement
Table of Contents
