Table of Contents
Advertisement
1
2
3
4
5
6
7
8
9
+10
0
REMOTE CONTROLLER
RC - 422 DV
5
Press the
PLAY
The DVD Changer starts playback.
If you have inserted a DVD video disc with a title menu
or a Video CD with PBC (Playback Control) function-
or
ality, a menu screen may appear. See "Direct Play-
back via the On-Screen Menu" on page 16.
Play
To start playback of a PBC-equipped VIDEO CD
from the menu screen, set "PBC" to "ON" via the on-
screen menu function. See page 38.
Inserting other discs
1. Press the
OPEN/CLOSE button to open the disc drawer.
2. Press the DISC SKIP
/
edly until the disc you wish to replace can be accessed.
3. Remove the disc you wish to replace, and insert another disc.
4. Press the
OPEN/CLOSE button again to close the disc drawer.
Note:
You can also press the
PLA Y button to automatically close
the drawer and start playback of the disc that is currently up
front. To start playback of another disc than the one in the fr o nt
tray, you first need to close the disc drawer.
Selecting the desired disc for playback
Press one of the DISC 1–5 buttons on the main unit or on the
remote controller. The DPC-5.1 starts playing the first title of the
selected disc. There is no need to press the
<main unit>
Disc Select
1
2
3
4
Notes:
•If you select the desired disc using one of the
DISC 1–5 buttons while the DVD Changer is playing back a title
of another disc, playback starts with the first title of the newly
selected disc.
•You can also press the DISC SKIP
DISC +/– button to jump to the disc in the next tray (or from
tray #5 to tray #1 if the disc in tray #5 is curr ently being played
back). In that case playback will start with the first title of the
disc in the newly selected tray.
•If you select the desired disc by pressing the DISC SKIP button
while the DVD Changer is stopped, pr e ss the
to start playback of the first title of the selected disc.
The FIRST SETUP screen
The FIRST SETUP screen is only displayed the very first time
you switch on your DPC-5.1. This page allows you to set
the two single most important parameters. Note that you
POWER
OPEN/CLOSE
PLAY
PAUSE
STOP
MENU
ENTER
/ / /
TOP MENU
+
–
DISC
/
PLAY button.
button on the main unit repeat-
PLAY button.
<remote controller>
DISC 1
DISC 2
DISC 3
5
DISC 4
DISC 5
/
button on the unit or
PLAY button
To obtain a higher picture quality
Occasionally, some picture distortion not usually visible during a
normal telecast may appear on the TV screen during playback of
a DVD video disc. This is due to the fact that DVD videos provide a
higher resolution and therefore also more data to process. While
the amount of noise depends on the TV you connect the DVD
Changer to, reducing the sharpness setting on your TV when view-
ing DVD video discs may alleviate the problem.
DVD
VCD
CD
About the
DVD
VCD
CD
The
icons on the heading bars below show the discs
that support the function described in the section in question.
DVD
: This function is available for playback of DVD video discs.
VCD
: This function is available for playback of VIDEO CDs.
CD
: This function is available for playback of audio CDs.
can change these settings any time by selecting the ap-
propriate on-screen menu function. See also page 34, 35.
1. Check the video connection of the DVD Changer to
your TV set (see page 10 and following) and switch
on your TV.
2. Switch on the DVD Changer.
The following menu screen page is displayed:
3. Press the remote controller's
or
button to select "On-
Screen Language" and press
the ENTER button.
You can select one of the
following languages: ENG
(English), FRE (French), or SPA
(Spanish). That language will
be used on all on-screen
menu pages and for
subtitling. See page 35.
4. Select the desired lan-
guage using the
button and confirm by pressing
ENTER.
Note:
If you agree with the currently selected language, just press
ENTER without changing the setting.
5. Press the
button to select the "TV Shape" function
and confirm by pressing ENTER.
This function allows you to specify the picture size of
your TV. See 35 for details.
6. Use the
and
confirm by pressing ENTER.
7. Press the SETUP button to store your settings.
The settings are stored and you are returned to the FIRST
SETUP screen page. As stated above, you can also
change these settings at a later stage. See page 32.
symbols
DVD
Notes:
•For PBC (Playback Control) of VIDEO
CDs, see "About VIDEO CDs" on page 9.
•Depending on the DVD video disc you
are using, you may need to press the
TOP MENU or MENU button to display the
menu screen.
Thank you for your purchase of
our DVD-Video Player.
Please make a selection for
On-Screen Language and your TV shape
and press ENTER button on your remote control.
FIRST SETUP
On-Screen Language
TV Shape
<remote controller>
To select the items
on the screen.
ENTER
After selecting an
item, confirm your
or
choice by pressing
ENTER.
buttons to specify the screen size and
VCD
CD
ENG
4:3LB
15
Advertisement
Table of Contents
