Table of Contents
Advertisement
CONFIGURING YOUR TELEPHONE
ACCESS MODULE
IMPORTANT:
The Telephone Access Module is designed to
allow remote access to your thermostat set-
tings and information. To access this informa-
tion or make changes, you must connect with
the Telephone Access Module from an out-
side line. If you want to access the Telephone
Access Module locally, you must use a sec-
ond telephone line or a cellular telephone.
Entering the Configuration Menu
IMPORTANT
Your installer may have configured your Tele-
phone Access Module. Before changing the
configuration, discuss the changes with your
installer.
To enter the Configration Menu:
1.
Call the Telephone Access Module.
2.
Enter your Pass Code.
3.
Listen for any active alerts.
69-1353
4.
Press 99 anytime after the room temperature is
announced.
5.
You will hear, "This is the Configuration Menu;
enter the Configuration Number followed by the #
key."
6.
See Table 2 for configuration numbers.
Table 2. Configuration Numbers.
Configuration
Number
1
2
3
4
5
6
7
8
9
10
11
14
Description
Entering Your Identification (ID)
Number
Low Limit Setting
High Limit Setting
Ring Setting
Changing Your Pass Code
Assigning Zone Names (if zoning
is installed)
Filter Change Setting
Alert Dial-out Setting
Telephone Numbers Setting
Power Outage Setting
For Installer Use Only
Advertisement
Table of Contents
