Features; Symbols; Assembly; Operation - Ryobi P510 Operator's Manual

SERVICE
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to the nearest
AUThORIZED SERVICE CENTER for repair. When servic-
ing, use only identical replacement parts.
WARNINg:
The operation of any power tool can result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shields and, when needed, a full face shield. We recommend
Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.
Always use eye protection which is marked to comply with ANSI Z87.1.
PRODUCT SPECIFICATIONS
Motor ....................................................................... 18V DC
Switch .......................................................... Variable Speed
UNPACKINg
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKINg LIST
Reciprocating Saw
Saw Blades (2)
Lanyard (not included in combo)
Operator's Manual
WARNINg:
Do not allow familiarity with tools to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.

SYMBOLS

SAVE ThESE INSTRUCTIONS

FEATURES

ASSEMBLY

OPERATION

6 — English
WARNINg:
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly and
understand completely the operator's manual. If you
do not understand the warnings and instructions in the
operator's manual, do not use this product. Call Ryobi
customer service for assistance.
Length of Stroke ........................................................ 7/8 in.
No Load Speed .................................. 0-3,000 r/min. (RPM)
WARNINg:
If any parts are damaged or missing do not operate this
tool until the missing parts are replaced. Failure to do so
could result in possible serious personal injury.
WARNINg:
Do not attempt to modify this tool or create accessories not
recommended for use with this tool. Any such alteration
or modification is misuse and could result in a hazardous
condition leading to possible serious personal injury.
WARNINg:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
tool when assembling parts.
WARNINg:
Always wear safety goggles or safety glasses with side
shields when operating tools. Failure to do so could re-
sult in objects being thrown into your eyes, resulting in
possible serious injury.