Application Default Settings; Login; Change Ip Address And Name; Set Time & Date - Cisco VG30D User Manual

Access Control

Application Default Settings

At any time during the configuration process you can undo your settings and start again by resetting the
Cisco VG30D Voice Gateway to its default settings. Refer to

Login

To access the Gateway Management Interface, perform the following procedure:
Step 1 Enter the Management IP address of the Cisco VG30D Voice Gateway (default is 192.168.1.1) in the
Address field of your browser. When the Cisco VG30D Voice Gateway unit is located, you will be asked
to enter a User Name and a Password.
For User Name (or User ID), enter Advanced.
Step 2
For Password, enter Advanced. An introduction screen will display.
Step 3
Click Continue and the Cisco VG30D Voice Gateway Diagnostic Overview screen (the main screen)
Step 4
displays.

Change IP Address and Name

Step 1 Select Configuration, Gateway and then Set IP Address.
Step 2 Insert new IP address at Set Gateway Management IP Address.
Step 3 If required, insert a name for the unit at Gateway Name.
Step 4 If required, you may also change the Subnet Mask and Default Gateway Address.
Select Submit and the displayed settings will be confirmed.
Step 5
To return to the Menu, select Close .
Step 6
Note
Set Time & Date
Select Configuration, Gateway and then Set Time & Date.
Step 1
Select Synchronise with PC (if the computer clock is set correctly), or enter the correct values and then
Step 2
Set with current values.
To return to the Menu, select Close .
Step 3
Cisco VG30D Voice Gateway User Guide
3-4
Changes will take effect next time that the Cisco VG30D Voice Gateway is rebooted.
Chapter 3 Initial Configuration
Resetting Applications to Defaults.
OL-19276-01