Dimensions And Weights; Table 1-1 Hp Integrity Rx8620 Server Dimensions And Weights; Table 1-2 Hp Integrity Rx8620 Server Component Weights - HP Integrity rx8620 Site Preparation Manual

System Specifications

Dimensions and Weights

Dimensions and Weights
This section provides dimensions and weights of the server and server components.
Table 1-1 HP Integrity rx8620 Server Dimensions and Weights
Height - Inches (centimeters)
Width - Inches (centimeters)
Depth - Inches (centimeters)
Weight - Pounds (kilograms)
a. This weight represents a fully configured server before it is installed in a
rack.
b. The packaged weight represents a server installed in a 2-m rack. The
packaged weight includes a fully configured server in a 2-m rack with a rear
door, rail slide kit, line cord anchor kit, interlock assembly, cable
management arm, 120 lb. ballast kit, and a 60A PDU. The shipping box,
pallet, and container, not included in the packaged weight in Table 1-1, adds
approximately 150.0 lb. to the total system weight when shipped. The size
and number of miscellaneous pallets will be determined by the equipment
ordered by the customer.
Table 1-2 provides component weights for calculating the weight of a server not fully configured. Table 1-7 on
page 12 provides an example of how to calculate the weight. Table 1-8 on page 12 is a blank worksheet for
calculating the weight of the server.
Table 1-2 HP Integrity rx8620 Server Component Weights
Quantity
1 Chassis
1 System backplane
1 PCI-X card cage assembly
2 PCI-X power supply
6 Bulk power supply
1 Mass storage backplane
1 - 4 Cell board
1 - 4 Hard disk drive
1 - 2 Removable media disk drive
4
Stand-alone
29.55 (75.00)
17.50 (44.50)
30.00 (76.20)
368.00
Description
Packaged
86.50 (219.70)
40.00 (101.60)
48.00 (122.00)
a b
(166.92) 813.00 (368.77)
Weight (lb./kg.)
131.00 (59.42)
20.0 (9.07)
20.40 (9.25)
5.00 (2.27) each
12.00 (5.44) each
1.00 (0.45)
27.80 (12.61) each
1.60 (0.73) each
2.20 (1.00) each
Chapter 1