Panasonic DMC-GH3KBODY Owner's Manual page 297

Others
Transmission of the image fails midway.
•
Is the size of the image too large?
> Transmit after dividing the motion picture with [Video Divide] (P199).
> Reduce the image size at [Size] (P224), and then send.
> Image cannot be transmitted when the battery indicator is flashing red.
Motion picture cannot be transmitted.
•
File format of the motion picture that can be sent differs depending on the destination.
•
Is the size of the image too large?
> Transmit after dividing the motion picture with [Video Divide] (P199).
I cannot send images to an AV device.
•
Sending may fail depending on the operational status of the AV device.
Also, sending may take a while.
TV, PC and printer
The picture does not appear on the television.
•
Is the camera connected to the TV correctly?
> Set the TV input to external input mode.
The display areas on the TV screen and the camera's monitor are different.
•
Depending on the TV model, the pictures may be extended horizontally or vertically or they
may be displayed with their edges cut off.
The motion pictures cannot be played back on a TV.
•
Are you trying to play back the motion pictures by directly inserting the card in the card slot of
the TV?
> Connect the camera to the TV with the AV cable (optional), or with the HDMI mini cable
(optional), and then play back the motion pictures on the camera.
The picture is not displayed fully on the TV.
> Check [TV Aspect] setting.
(P49)
(P208)
(P250)
297