Panasonic DMC-GH3KBODY Owner's Manual page 140

Recording
Setting the White Balance manually
Set the White Balance value. Use to match the condition when taking photographs.
1
Press [ ].
2
Rotate the rear dial or front dial to select [
press 3.
3
Aim the camera at a sheet of white paper etc. so that the
frame in the center is filled by the white object only and
then press [MENU/SET].
•
White Balance may not be set when the subject is too bright or too dark. Set the White Balance
again after adjusting to appropriate brightness.
Setting the color temperature
You can set the color temperature manually for taking natural pictures in different lighting
conditions. The color of light is measured as a number in degrees Kelvin. As the color
temperature increases, the picture becomes more bluish. As the color temperature
decreases, the picture becomes more reddish.
1
Press [ ].
2
Rotate the rear or front dial to select [
3
Press 3/4 to select the color temperature and then press
[MENU/SET].
•
You can set a color temperature from [2500K] to [10000K].
1 2 3
], [ ], [
], and then press 3.
4
], or [ ], and then
6500K
140