Panasonic DMC-GH3KBODY Owner's Manual page 131

Recording
[Wireless Setup]
•
Press the [AF/AE Lock] button to fire a test-flash.
A Firing Mode
B Flash output
C Luminosity ratio
Item
[Firing Mode]
[TTL]:
[Built-in] ¢
[OFF]:
[Flash Adjust.]
The output of the built-in flash is set manually.
[Firing Mode]
[TTL]:
[AUTO]
[MANUAL]:
[A Group]/
[OFF]:
[B Group]/
[Flash Adjust.]
[C Group]
Set the output of the external flash manually when [Firing Mode] is set to
[TTL].
[Manual Flash Adjust.]
Set the luminosity ratio of the external flash when [Firing Mode] is set to
[MANUAL].
•
You can set from [1/1] (full brightness) to [1/128] in steps of [1/3].
¢ Not available when [Wireless FP] is set to [ON].
Description of settings
The camera automatically sets the output of the built-in
flash.
The built-in flash fires only a signal-flash.
The camera automatically sets the output of the external
flash.
: Flash output is set by the external flash.
¢
Set the luminosity ratio of the external flash manually.
The external flashes in the specified group will not fire.
A B
C
131