Appendix; Led Indicator Messages - ViewSonic PJD5223 User Manual

Appendix

LED Indicator Messages

LED Type Color
Power LED Blue
Temp/Lamp Blue/Red Off
LED
Power LED Blue
Temp/Lamp Blue/Red Off
LED
Power LED Blue
Temp/Lamp Blue/Red Off
LED
Power LED Blue
Temp/Lamp Blue/Red Off
LED
Power LED Blue
Temp/Lamp Blue/Red Off
LED
Power LED Blue
Temp/Lamp Blue/Red Flash
LED
Power LED Blue
Temp/Lamp Lamp
LED (Red)
Power LED Blue
Temp/Lamp Temp
LED (Blue)
Power LED Blue
Temp/Lamp Blue+
LED Red
Status
Solid Standby mode when green mode is turned on.
Flash Standby mode when green mode is turned off.
Solid Powering up
Solid Normal operation
Flash Powering down
(The projector needs to cool for 35 seconds after
the projector is turned off.)
Flash The projector system has some problems with its
fans, so the projector cannot start up.
Solid The lamp has reached its end of life and must be
changed soon. The lamp will continue to operate
Flash
until it fails. Change the lamp. If the lamp is off,
then the ballast will become malfunction.
Solid 1. Temperature is too high. The lamp will turn off.
The fan motor is cooling the lamp.
Flash
Or
2. The cooling process is not complete after the
peojector is shut down and re-started right away.
Solid The lamp ignition failed. If temperature is too high,
the fans will cool the lamp.
Flash
37
Meaning
EN-37