Security Kit Installation Procedures - Kyocera KM-3035 Operation Manual

Security Kit Installation Procedures

Step 1: Operation preparation
Security Kit installation
The Security Kit is installed by service personnel.
Precautions for Security Kit installation
• The re-copy function is now prohibited.
• The Delete Invalid Data menu is replaced by the Format Hard Disk menu.
Precautions for installing the Security Kit on a pre-used copy
machine
The entire hard disk must be formatted.
Step 2: Changing the Management Code
The management code must be changed to use the security kit. This prevents
everyone except the administrator from using the security kit.
1 Press the Default Setting/Counter key.
2 Press the Machine Default key.
3
Enter password using the numeric keypad.
4
Select Management Change Code from the left side setup field, and press
the Change # key.
5
Input a new management code using the numeric keypad.
Management code change
Abl e to cha nge ma nag emen t co de.(# key)
Default setting - Machine default
6
Press the Close key.
Back Close
1-9