Asus M4A78 PRO - Motherboard - ATX User Manual page 58

DRAM Timing Mode [Auto]
Allows selection of the DRAM Timing Mode.
Configuration options: [Auto] [Both]
The following sub-items appear only when you set the DRAM Timing Mode item to [Both].
DCT0 1st Information: 1-3-3-2(4)-3-11-3-2
CAS Latency (CL) [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] [7 CLK DH_Only]
TRCD [Auto]
Configuration options: [3 CLK] [4 CLK] [5 CLK] [6 CLK] [Auto]
TRP [Auto]
Configuration options: [3 CLK] [4 CLK] [5 CLK] [6 CLK] [Auto]
tRTP [Auto]
Configuration options: [Auto] [2-4 CLK] [3-5 CLK]
TRAS [Auto]
Configuration options: [5 CLK] [6 CLK] – [17 CLK] [18 CLK] [Auto]
TRC [Auto]
Configuration options: [11 CLK] [12 CLK] – [25 CLK] [26 CLK] [Auto]
tWR [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRRD [Auto]
Configuration options: [2 CLK] [3 CLK] [4 CLK] [5 CLK] [Auto]
DCT0 2nd Information: 5-75-75
tWTR [Auto]
Specifies the write to read delay when accessing the same DIMM.
Configuration options: [1 CLK] [2 CLK] [3 CLK] [Auto]
tRFC0 [Auto]
Configuration options: [Auto] [75ns] [105ns] [127.5ns] [195ns] [327.5ns]
tRFC1 [Auto]
Configuration options: [Auto] [75ns] [105ns] [127.5ns] [195ns] [327.5ns]
Command Rate: 1T/2T [Auto]
Allows selection of the DRAM command rate.
Configuration options: [Auto] [1T] [2T]
DCT0/DCT1 Strength Config [Auto]
Allows adjustments of the advanced DRAM strength parameters.
Configuration options: [Auto] [DCT 0] [DCT 1] [Both]
The following sub-items appear only when you set the DCT0/DCT1 Strength Config. item
to [DCT 0] or [Both].
DCT0:CKE drive strength. [Auto]
Configuration options: [Auto] [1x] [1.25x] [1.5x] [2x]
2-14 ASUS M4A78 PRO