1.2
Motherboard overview
1.2.1
Motherboard layout
Ensure that you install the motherboard into the chassis in the correct orientation. The edge
with external ports goes to the rear part of the chassis.
Place this side towards
the rear of the chassis.
Place six screws into the holes indicated by circles to secure the motherboard to the
chassis. DO NOT overtighten the screws! Doing so can damage the motherboard.
1.2.2
Layout contents
Connectors/Jumpers/Slots/LED
1.
ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) 1-13
2.
AM2 CPU Socket
3.
DDR2 DIMM slots
4.
Keyboard/mouse power (3-pin PS2_USBPW 1-4)
5.
IDE connector (40-1 pin PRI_IDE)
6.
CPU fan connector (4-pin CPU_FAN)
7.
Serial ATA connectors (7-pin SATA1, SATA2)
8.
USB device wake-up (3-pin USBPW 5-10)
ASUS M2N68-AM SE2
Page Connectors/Jumpers/Slots/LED
9.
USB connectors (10-1 pin USB56, USB 78, USB910)
1-3
10. Clear RTC RAM (3-pin CLRTC)
1-3
11. Internal speaker connector (4-pin SPEAKER)
1-9
12. Standby power LED (SB_PWR)
1-11
13. System panel connector (10-1 pin F_PANEL)
1-12
14. Optical drive audio connector (4-pin CD)
1-10
15. Front panel audio connector (10-1 pin AAFP)
1-8
16. PCIe x16/PCIe x1/PCI slots
Page
1-12
1-7
1-13
1-1
1-14
1-11
1-14
1-7
1-2