Intel BOXD850EMD2L - 850E 478PIN MAX-2GB UATX 3PCI Specifications page 103

Table 70. Peripheral Configuration Submenu (continued)
Feature
Parallel Port
Mode
Base I/O address
(This feature is present
only when Parallel Port
is set to Enabled)
Interrupt
(This feature is present
only when Parallel Port
is set to Enabled)
DMA
(This feature is present
only when Parallel Port
Mode is set to ECP)
Audio Device
LAN Device
Modem Device
Legacy USB Support
Options Description
• Disabled
Configures the parallel port.
• Enabled
Auto assigns LPT1 the address 378h and the interrupt IRQ7.
• Auto (default)
An * (asterisk) displayed next to an address indicates a
conflict with another device.
• Output Only
Selects the mode for the parallel port. Not available if the
parallel port is disabled.
• Bi-directional
(default) Output Only operates in AT
• EPP
Bi-directional operates in PS/2-compatible mode.
• ECP
EPP is Extended Parallel Port mode, a high-speed
bidirectional mode.
ECP is Enhanced Capabilities Port mode, a high-speed
bidirectional mode.
• 378 (default)
Specifies the base I/O address for the parallel port.
• 278
• IRQ 5
Specifies the interrupt for the parallel port.
• IRQ 7
(default)
• 1
Specifies the DMA channel.
• 3 (default)
• Disabled
Enables or disables the onboard audio subsystem. For
boards with no onboard audio subsystem, this option does not
• Enabled
appear; however, this option does appear if a CNR card with
(default)
an audio subsystem is installed.
• Disabled
Enables or disables the onboard LAN device. For boards with
no onboard LAN subsystem, this option will not appear;
• Enabled
however, this option does appear if a CNR card with a LAN
(default)
subsystem is installed.
• Disabled
Enables or disables a modem device on a CNR card. This
option appears only when a CNR card with a modem is
• Enabled
installed.
(default)
• Disabled
Enables or disables legacy USB support.
• Enabled
(default)
BIOS Setup Program
†
-compatible mode.
103